$64.46
$118.61
MicroCover MicroCover glass fiber insulation is designed for hot pipes with temperatures up to 450°C. It maintains heat within pipes and protects workers from direct contact with heat. MicroCover products are straight tubes with a central hole to fit steel or copper pipes. Each section is 1 meter long for easy pipe length calculation. Operating Temperature MicroCover glass fiber insulation has a wide operating temperature range of -18°C to 450°C. It’s typically used for high-temperature applications due to its relatively stable thermal conductivity at higher temperatures. Thermal conductivity Thermal conductivity is crucial for hot water pipe insulation. Lower thermal conductivity means thinner insulation can be used, reducing product cost. Glass fiber insulation is suitable for pipes below 450°C due to its low and stable thermal conductivity. MicroCover Thermal Conductivity Table Hot Surface (°C) Cold Surface (°C) Mean Temperature (°C) Apparent Thermal Conductivity (W/m·K) 55.60 20.48 38.04 0.03246 134.58 24.11 79.35 0.03697 213.25 28.12 120.69 0.04146 293.95 33.08 163.52 0.04727 374.69 38.60 206.65 0.05456 454.33 44.83 249.58 0.06356 Water Vapor Permeability Water or vapor permeability is crucial in hot pipe systems. After insulating pipes, a jacket is installed to protect the insulation and prevent water or rain damage. If the jacket leaks and water penetrates to the pipe surface, steel pipes can develop red rust when exposed to water and moisture. If left untreated, this can lead to corrosion over time. Glass fiber insulation for pipe systems incorporates innovations to prevent water penetration. When rain falls or water drips on the insulation, it forms droplets on the surface, similar to a car windshield coating in rain. The water doesn’t adhere to the surface and evaporates naturally. Insulation Thickness Selection Guide MicroFiber insulation manufacturers have designed this table for quick and convenient insulation thickness selection: Economically Appropriate Insulation Thickness Pipe System Fluid Temperature Range Pipe Size < 1″ (< 33 mm) 1.5” – 2” (42 – 60 mm) 2.5” – 4” (73 – 114 mm) 5” – 6” (140 – 168 mm) 8″ – 12″ (219 – 324 mm) Hot Pipes (Steam, Hot water) 152 – 238 High Pressure 1.5″ (38mm) 1.5″ (38mm) 2″ (50 mm) 2.5″ (63 mm) 3″ (75 mm) Medium Pressure 122 – 151 1.5″ (38mm) 1.5″ (38mm) 2″ (50 mm) 2″ (50 mm) 2.5″ (63 mm) Low Pressure 94 – 121 1″ (25 mm) 1.5″ (38mm) 1.5″ (38mm) 2″ (50 mm) 2″ (50 mm) Low Temperature 49 – 93 1″ (25 mm) 1″ (25 mm) 1.5″ (38mm) 1.5″ (38mm) 1.5″ (38mm) Condensate 30 – 50 1″ (25 mm) 1″ (25 mm) 1″ (25 mm) 1.5″ (38mm) 1.5″ (38mm) Product Size Table Pipe Size (NPS) Internal Diameter of Pipe Insulation Insulation Thickness (mm) 0.5 22 25, 38, 50, 63, 75, 100 0.75 27 25, 38, 50, 63, 75, 100 1 34 25, 38, 50, 63, 75, 100 1.25 43 25, 38, 50, 63, 75, 100 1.5 49 25, 38, 50, 63, 75, 100 2 61 25, 38, 50, 63, 75, 100 2.5 74 25, 38, 50, 63, 75, 100 3 90 25, 38, 50, 63, 75, 100 3.5 102 25, 38, 50, 63, 75, 100 4 115 25, 38, 50, 63, 75, 100 4.5 128 25, 38, 50, 63, 75, 100 5 143 25, 38, 50, 63, 75, 100 6 170 25, 38, 50, 63, 75, 100 7 196 25, 38, 50, 63, 75, 100 8 221 25, 38, 50, 63, 75, 100 9 246 25, 38, 50, 63, 75, 100 10 275 25, 38, 50, 63, 75, 100 12 324 25, 38, 50, 63, 75, 100 Technical Data Table Features MicroCover Test Standard Operating Temperature -18°C – 450°C ASTM C 411 Maximum Surface Temperature -20°C – 116°C ASTM C 1136 Density 64 kg/m³ Water Vapor Absorption < 1.0% at 49°C, 95% RH ASTM C1104 Mold and Fungus Growth Does not promote mold and fungus growth ASTM C665 Surface Burning Characteristics Flame Spread < 25 Smoke Development < 50 ASTM E84
Hot And Cold Pipe Insulation Work
